Mist Intelligent Spray Rainforest Fogger Humidifier Sprinkler Kit for Reptile

Description:
A smart, programmable misting and humidifying system designed to replicate tropical rainforest environments for reptiles and plants. 

Features:

• Simulates natural precipitation with fine misting for effective humidity and cooling. Ideal for rainforest terrariums.
• Smart Timed Misting Modes: Always-on, always-off, and automatic cycle modes with memory function. 
• Easily configure spray duration and intervals with a responsive touchscreen.
• 360 degree Adjustable Spray Heads
• Compact Integrated Design
• Equipped with two soft mist spray heads, gentle on plants and decor.
• Self-priming pump allows drawing from any water container, eliminating need for water tap. 
• No leakage risk, compatible with containers of any shape or size.
• Complete Installation Kit
• Elegant Touchscreen Panel

Installation Notes:

• The water intake filter must be fully submerged in water. Otherwise, air entry may cause water supply failure.
• Ensure inlet tube is pushed tightly to the base of the connector. Loose fitting can result in air leakage and failed water intake.
• Nozzle Setup and Angle Adjustment: Different nozzle types offer varied misting effects. Adjust position and angle as needed.
• Initial Air Purge: Before full connection, let pump run briefly with outlet tube disconnected until bubbles are cleared and water flow is stable. Then connect misting lines.

Specifications:

• Material: ABS Plastic, PE Tubing, Brass Nozzles
• Spray Capacity: Approx. 850ml/min
• Power Supply Method: USB Direct Plug-In (Adapter Not Included)
• Rated Voltage: 5V
• Rated Current: 1A
• Spray Distance: At least 2 meters
• Suction Height: Up to 15 meters
• Noise Level: No more than 65 decibels (measured from 30 cm away)
• Water Pressure: Over 30 psi (about 200 kPa)
• Operating Temperature: 4 - 45 Temperature
• Size (L x W x H): 8.45 x 8.45 x 3.6 cm

Package Contents:

• 1 x Mist System Unit
• 1 x USB Cable
• 1 x 500cm PE Tube
• 1 x Tube Cutter
• 1 x Filter
• 1 x Tee Connector
• 1 x Elbow Connector
• 1 x R-Clip
• 2 x Spray Heads
• 5 x Cable Ties

Please Note:

• 1.To prevent siphon effect, keep the water container’s surface level below the misting heads.
• 2.Use purified water to avoid white residue on leaves and glass surfaces.